Difference between revisions of "Template Rotation Tutorial"

From Tube Software Wiki
Jump to: navigation, search
 
Line 26: Line 26:
  
 
==='''Note'''===
 
==='''Note'''===
Before starting the tutorial, a part must be created. This tutorial will be using the part that was created in the '''[[Template Designer Tutorial]]'''. '''Please complete the Template Designer tutorial before proceeding'''.
+
Before starting the tutorial, a part must be completed. This tutorial will be using the part that was created in the '''[[Template Designer Tutorial]]'''.  
  
  

Latest revision as of 09:47, 28 August 2013

Introduction

Temprot05.png
This tutorial will step through the process of adding a rotation to a template with the template rotation plug-in.

The template rotation plug-in allows rotations to be added to parts created using the template designer.











Tutorial

Note

Before starting the tutorial, a part must be completed. This tutorial will be using the part that was created in the Template Designer Tutorial.



Step 1

Once the part is complete, locate the rotation field next to the entry fields on the left side of the screen, as shown below. Since this part has only 2 bends, there will only be one rotation field available.

Temprot01.png



Step 2

Next, a rotation value will be applied to the part.

Enter "90" in the rotation field. This will add a rotation to the second bend on the part. See the image below.

Temprot02.png




Step 3

The tutorial is complete!

Rotations applied to the template design will be included in the results table at the top of the window.

Temprot03.png